Are your Gas Line Repair services available in Aurora?

Yes, Masters Plumbing Service provides round-the-clock Gas Line Repair services directly in Aurora, SD.

How much does emergency service cost in Aurora?

We offer upfront, transparent pricing with no hidden fees for all service calls in Aurora.

🔬 Combustible Gas Detection · Manometer Pressure Testing

Licensed Gas Line Repair in Aurora, SD — Safety Isn't Optional

Name: Masters Plumbing Service
Telephone: +1-855-718-1500
Price range: $$
Rating: 4.9

Not every plumber is certified for gas work in SD. Our gas plumbers hold active state certifications for natural gas and propane installations, carry CSST-qualified training for flexible corrugated stainless steel tubing systems, and document every job with a written pressure test result before we close out.

📞 Call +1-855-718-1500 — Certified Gas Plumbers

Certified Gas Plumbers in SD Combustible Gas Detector Manometer Pressure Test Standard Permit & Inspection Handled

Licensed Gas Line Repair service in Aurora, SD - Masters Plumbing Service

Our Gas Line Standards

How Masters Plumbing Service Approaches Gas Line Repair in Aurora

These aren't marketing points — they're the minimum requirements for safe gas line work. Every Masters Plumbing Service gas job in Aurora, SD meets all four, on every call, without exception.

📜

SD-Certified Gas Plumbers Only

Gas plumbing in SD requires specific certifications beyond a standard plumbing license. Every technician we dispatch for gas work holds an active state certification for gas line installation and repair. We can provide license numbers and certification documentation before any work begins — and we encourage you to verify them with the SD licensing board.

🔬

Combustible Gas Detection at Every Connection

We also detector-test any existing connections near the work area that weren't disturbed, to confirm no pre-existing issues in the adjacent line.

📊

Manometer Pressure Test — Always

This documentation is required by many local inspections and is the professional standard for confirming gas work is complete. Soapy water bubble testing is not an acceptable substitute for a manometer test on anything more than a simple appliance flex connector.

🏛️

Permits Pulled, Inspections Scheduled

Gas line work — new runs, repairs to service lines, appliance connection upgrades — requires a permit and inspection in most SD jurisdictions. We pull the required permit, schedule the inspection, and provide you with the inspection sign-off as part of the job documentation.

Our Gas Line Services

What Our Certified Gas Plumbers Handle in Aurora

Our gas plumbers handle the full range of residential and light commercial gas line work in Aurora, SD — from a suspect appliance connector to a full new gas run for a generator or outdoor kitchen.

Emergency

Gas Leak Detection & Repair

If you smell gas — the distinctive sulfur/rotten-egg odor added to natural gas for detection — the immediate protocol is: leave the building without operating any switches, leave the door open, call your gas utility's emergency line from outside to shut off the street supply, then call us. Our certified gas plumbers arrive with combustible gas detectors to locate the exact source of the leak in service lines, appliance connectors, meter risers, or distribution piping inside the structure.

Appliances

Gas Appliance Connection & Reconnection

Flexible corrugated stainless steel tubing (CSST) connections require proper bonding in most SD jurisdictions to prevent damage from nearby lightning events — a code requirement many contractors overlook. Our gas techs are CSST-bonding trained.

New Runs

New Gas Line Installation

Adding a gas barbecue outlet, running gas to a new range or cooktop, extending gas to an outdoor kitchen or pool heater, or adding a gas stub for a whole-house generator — all require a new gas line run sized correctly for the BTU demand of the connected appliances and the existing line's supply pressure.

Pressure Test

Gas System Pressure Testing

A standalone gas system pressure test — without any repair or installation — is requested for several reasons: before purchasing a home with gas appliances, when an unexplained gas smell has been investigated and not found but a homeowner wants confirmation the system is sound, or at a contractor's request before final inspection.

CSST

CSST Flexible Gas Piping Service

If you have CSST in your home and it was installed before 2010, the bonding may not meet current code requirements. We can assess existing CSST installations, add required bonding conductors, and document the system for insurance or resale purposes.

Propane

Propane System Service & Repair

{Propane systems used in areas of Aurora, SD without natural gas service have specific considerations compared to natural gas: different line pressures at the regulator (propane distribution pressure varies by system design), different BTU content per cubic foot, and propane's behavior of settling low (it's heavier than air, so propane accumulates at floor level rather than rising to ceilings).|We service propane supply lines from the tank to the structure, appliance connections, regulator function checks, and leak detection using detectors calibrated for propane's lower explosive limit.}

📞 Call +1-855-718-1500 — Certified Gas Plumbers Ready

Our Process

4 Steps — Dispatch to Pressure-Tested Complete

Every step exists because gas work without it is unsafe, regardless of how minor the job appears.

Call & Emergency Protocol If Active Leak

Our dispatcher flags gas calls for certified-only technician dispatch. No unapproved personnel work on gas lines.

Gas Detection Survey & System Assessment

For new installation work, we assess the existing supply line pressure, measure the BTU demand of the new appliances, and calculate the required pipe diameter for the new run before quoting.

Flat-Rate Quote, Permit Coordination, Work Execution

You receive a flat-rate quote covering the repair or installation, permit costs, and inspection coordination before any work begins. We pull the permit, execute the work, and do not restore gas to the affected segment until the manometer test passes.

Manometer Test, Detector Survey, & Written Documentation

The permit inspection follows, and we provide you with the signed inspection record. The job is not complete until that documentation is in your hands.

Customer Reviews

What Aurora, SD Property Owners Say About Our Gas Work

★★★★★

Faint gas smell near the furnace room — not strong, but unmistakable. Called Masters Plumbing Service after the utility came out and said the issue was on the customer side of the meter. Their tech arrived with a detector calibrated for natural gas, walked the full accessible distribution system, and pinpointed the leak to a union fitting on the furnace supply line — a fitting that had been vibrating loose from years of furnace cycling. Repaired the union, re-tested with detector and manometer, gas restored. Written documentation of the test result for my records.

— M. Rashid, Aurora

★★★★★

I bought an older home in Aurora that had a gas dryer stub but I'm switching to a gas range. Masters Plumbing Service traced the existing gas distribution, confirmed the supply capacity was adequate, extended the run to the kitchen with correctly sized pipe, capped the dryer stub, and provided a full manometer test on the entire modified system. Very thorough work — documentation exactly as described upfront.

— S. & A. Ibrahim, Aurora, SD

★★★★★

Commercial kitchen remodel required moving two gas lines and adding a new connection for a salamander broiler. Masters Plumbing Service sized the header and branch lines for the total connected BTU load, pulled the required commercial permit, executed the work, and provided a full system pressure test documentation for the health department inspection file. Clean work, inspected and passed first visit.

— T. Andersen, Aurora, SD

Trusted Gas Line Repair service in Aurora, SD - Masters Plumbing Service

Common Questions

Gas Line Questions We Answer Before Every Job

Do not re-enter the structure to search for the leak source yourself. Do not use soapy water to check fittings while gas may still be present in the structure. Our certified gas techs with proper detection equipment handle the leak location and repair safely.

Soapy water bubble testing can miss very slow leaks that don't produce a visible bubble at the test flow rate. A manometer pressure test catches any leak, regardless of how slow, by measuring the total gas loss over a timed hold. It's the only method that conclusively confirms a leak-free installation.

We strongly advise confirming certification before allowing any contractor to work on your gas system. An unlicensed repair that causes a subsequent leak or fire creates complex insurance and liability issues in addition to the obvious safety risk.

If your home has CSST and it was installed before about 2010, a bonding assessment is worthwhile. We assess existing CSST systems and add bonding conductors where required. Some homeowners' insurance carriers ask for confirmation of CSST bonding compliance.

Yes, in virtually all jurisdictions in SD. Repairs to service lines, new gas runs, and appliance connection modifications (anything beyond replacing a like-for-like flex connector) typically require a permit and inspection. We pull the required permit as part of the job and coordinate the inspection.

For whole-house generators, the gas line sizing must account for the generator's full rated BTU input at startup load — which is typically higher than run load. Undersizing the gas line to a generator causes voltage drops and potential shutdown on startup.

Licensed Gas Line Repair in Aurora, SD — Safety Isn't Optional